Find Clear Water Pump, Single Stage Water Pump, Single Suction Centrifugal Pump on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Centrifugal Pump/Impeller Pump & Parts > IS type single-stage and single-suction centrifugal pump

IS type single-stage and single-suction centrifugal pump

  • IS type single-stage and single-suction centrifugal pump
  • IS type single-stage and single-suction centrifugal pump
  • IS type single-stage and single-suction centrifugal pump
  • IS type single-stage and single-suction centrifugal pump

IS type single-stage and single-suction centrifugal pump

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 1 Set/Sets
    Delivery Time: 60 Days
    Packaging: Wooden case or Frame steel Case
    Productivity: 1100000 sets/year
    Brand: GAOFENG
    Transportation: Ocean,Land,Air
    Place of Origin: Zigong,Sichuan,China
    Supply Ability: 110000 sets/month
    Certificate: ISO9001
    HS Code: 8413709990
    Port: Shanghai,Guangxi,Chengdu

Basic Info

Model No.: IS 80-65-160

Product Description

IS type single-stage and single-suction centrifugal pump

IS type single-stage and single-suction centrifugal pump can be named by clear Water Pump,single stage water pump or single suction centrifugal pump.

Brief introduction

IS type pump is a single-stage single-suction (axial suction) centrifugal pump. This pump is applicable to industrial and city water supply, drainage, and also for the agriculture irrigation and drainage. Used for transporting clean water or other liquids similar to the clear water with physical and chemical characteristics. The temperature should below 80.


IS type pump series performance range(accounted by the design point)

Revolution:1450r/min~2900r/min

Inlet diameters:50~200mm

Capacity:3.3~460m3/h

Head:4~133m


Features and charts of the pump structure

1.Strcture features


IS series pump design is according to the performance and size stipulated by the international standard ISO2858, mainly made up of pump body, pump cover, impeller, shaft, sealing-ring, shaft sleeve and suspension bearing parts etc (refer to the structure figure).

The part of IS pump body and pump cover, is subdivided at the back of impeller, which is usually said as back door open type. Its advantage is convenient to maintain and no need to move the pump body, intake pipe, outtake pipe, and mend it by withdrawing the rotating parts.

The capsid of pump (pump body and pump cover) constitutes the workshop of pump. Impeller, shaft and rolling bearing build up of the rotating part of pump. The hanger bracket parts support the rotating parts of pump, the rolling bearing support the radial force and axial direction force of pump.

To balance the shaft force of pump, many pump set sealing-ring at the back and front of pump impeller, set balance hole at the back cover plate of impeller. Because the axial direction force of some pumps are not so heavy, there are no sealing-ring and balance hole at the back of impeller.

The axial direction force of pump is made up of stuffing gland, stuffing-ring and stuff etc so as to avoid gas or large amount of water leakage. If there are balance hole at the pump impeller, the empty cavity that full of soft stuff have a connection with the impeller intake, if the liquid at the intake of impeller remains vacuum, the air will be easy to access along the surface of shaft sleeve, so set a stuffing-ring to guide the pressure water in the pump house into the stuffing-ring to seal through the small hole on the pump cover. If there is no balance hole at the impeller, because of the pressure of water at the back of impeller higher than the atmospheric pressure, so the air leakage isn`t exit, so no need to set stuffing-ring.

o avoid the abrasion of shaft, there is a shaft sleeve to protect the stuffing house parts, set the sealing ring of O type between the shaft sleeve and shaft to avoid the air intake or water leakage.

The transmission style of pump is by connecting the flexible shaft-coupling with the motor. The rotating direction is clockwise form the drive end.

2.Structure figures


Single Suction Centrifugal Pump

The pump type table and main performance parameters.

1.Table drawing

Single Stage Water Pump





2.Outside drawing


Clear Water Pump






Packing and shippment


Clear Water Pump
































Sichuan Zigong Industrial Pump Co.,Ltd.

 Sichuan Zigong Industrial Pump Co., Ltd. (referred to as [ZG Pump") was founded in 1967. It is the earliest key enterprise in the production of impurity pumps and corrosion-resistant pumps. It is the largest industrial pump manufacturing based in Western China with the largest variety and specifications. The company's leading products include impurity pumps, chemical pumps, clean water pumps, hydraulic turbines and bottom-mounted propellers. There are 41 series and more than 600 varieties. The products serve petroleum, metallurgy, chemical, mining, textile and environmental protection, power and municipal facilities and other fields. The company is located in Zigong National High-tech Industrial Development Zone, covering an area of more than 400 acres. It is a pump manufacturer integrating research, production, sales and general contracting services to provide customers with the best solution for fluid transportation.

Company Info

  • Company Name: Sichuan Zigong Industrial Pump Co.,Ltd.
  • Representative: WU DEHUA
  • Product/Service: Axial pump , Chemical pump , Slurry pump , Water pump , Process pump , Industrial pump
  • Capital (Million US $): 200000000RMB
  • Year Established: 2005
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 1% - 10%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 5
  • No. of R&D Staff: 31 -40 People
  • No. of QC Staff: 11 -20 People
  • OEM Services Provided: no
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: No.66 Jinchuan Road,Hi-tech Industrial Park,Zigong,Sichuan,China
  • Contact Person: Ms. Ivy
  • Tel: 86-813-8269991
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters